Product documents, guides and videos.

Product data sheets

Technical and safety data sheets for each product — coverage, cure times, substrates and handling.

Product brochures

Download the full QDEK product catalog.

Articles & Guides

Written guidance on choosing a product, planning an installation and reading test results.

• Product SelectionSingle-Canister or Two-Part Cart? How to Compare Roofing Adhesive SystemsHow the two approaches differ on setup, crew, cleanup and coverage, with the independent wind-uplift result behind the bond.Read guide
• Planning & EstimatingHow to Estimate QDEK Canisters for a ProjectHow the coverage calculator estimates canisters from roof area, bonded layers, and canister size.Read guide
• Independent TestingHow to Read the UNO‑FOAM^® Wind-Uplift Test SummaryHow to read the independent ANSI/FM 4474 wind-uplift test summary, and what its result does not cover.Read guide

Coverage calculator

One 22 L UNO‑FOAM^® canister lays up to 4,800 linear feet of a 1-inch bead — up to 4,800 square feet, or 48 roofing squares, at 12 inches on center, depending on application. UNO‑GRIP^™ coverage is published as bonded area.

Videos & How-To

Watch product setup and application.

QDEKQDEK Product Overview: UNO‑FOAM & UNO‑GRIPA three-minute overview of QDEK roofing adhesives, application demonstrations and product testing. Video in English.UNO‑FOAM^®UNO‑FOAM^® | Installation GuideStep-by-step UNO‑FOAM^® | QD3000 setup and application guidance.UNO‑GRIP^™UNO‑GRIP^™ applicationApplying UNO‑GRIP^™ to bond TPO and EPDM membranes.EquipmentUNO‑FOAM^® equipment setupConnect the M180 hose to the QD3000 canister and adjust the M160-18 spray gun.

Independent Testing

Results from testing carried out by an outside laboratory, not by QDEK.