Data sheet summary
Published figures for both QDEK adhesives.
The published PDFs are the source of record. The UNO‑FOAM® file includes English and Spanish TDS/SDS documents. The UNO‑GRIP™ file includes an English TDS and English/Spanish SDS documents.
Insulation + cover board
UNO‑FOAM® | QD3000
The 48 square insulation adhesive for attaching insulation and cover boards in commercial roofing systems — one canister, no on-roof mixing.
What it bonds
- Insulation and cover boards in commercial roofing systems
- 48 square insulation adhesive
Coverage
- Up to 4,800 linear feet of a 1-inch bead from one 22 L disposable canister
- At 12 inches on center that equals up to 4,800 square feet — 48 roofing squares — depending on application
Time
- Open time: 5 minutes
- Handling strength: 15 minutes
- Full cure: 24 hours
Equipment
- M160-18 18-inch Wand Foam Adhesive Spray Gun; M180-12 or M180-18 hose
How to apply
- One canister — no on-roof mixing, correctly mixed every time
- No mixing carts, mixer straws or on-roof mixed material to waste
- 0 g/L VOC under SCAQMD Rule 1168
Spanish TDS: pages 15–16.
TPO + EPDM membranes
UNO‑GRIP™ | QD2040
The TPO/EPDM adhesive for TPO and EPDM membranes, including fleece-backed systems — 10 squares of bonded area from one 22 L canister.
What it bonds
- TPO and EPDM membranes, including fleece-backed systems
- TPO/EPDM Adhesive
Coverage
- 22 L disposable canister: up to 10 squares / 1,000 sq ft of bonded area
Time
- Allow 2–4 minutes, or until dry to touch, depending on temperature and humidity.
- Open time: 1+ hour
- Ultimate strength develops in 1–3 days
Equipment
- Spray gun with UniJet 11002B adjustable spray tip — spray tip included
- UniJet 11002B tip, adjustable 7–17-inch spray pattern
How to apply
- Apply adhesive to both surfaces to be mated, at 80% to 100% coverage
- High heat resistance
- 75 g/L VOC under SCAQMD Rule 1168
A Spanish UNO-GRIP™ TDS is not currently published.
Confirm the current TDS/SDS, roof-system requirements, and project documents before use.