The UNO Product Family
Coverage calculator.
Estimate canisters from published UNO‑FOAM® and UNO‑GRIP™ coverage.
UNO‑FOAM® | QD3000 — Insulation + cover board
Up to 4,800 linear feet of a 1-inch bead per 22 L disposable canister — at 12 inches on center that covers up to 4,800 square feet, or 48 roofing squares, depending on application.
1 square = 100 sq ft.
Each bonded layer is calculated at the published coverage.
Estimate
- Total bonded area
- —
- 22 L canisters
- —
- Published coverage used
- 48 squares per canister
Planning estimate only. This calculator does not determine wind-uplift approval or roof-system design.
One 22 L UNO‑FOAM® canister lays up to 4,800 linear feet of a 1-inch bead. At 12 inches on center that bead covers up to 4,800 square feet — 48 roofing squares — depending on application. The estimate assumes no waste allowance and no change of bead spacing. It is a planning figure, not a system approval or a guaranteed purchase quantity.
*Dependent on temperature and humidity. Coverage varies by application. See current TDS and SDS.
UNO‑FOAM® | QD3000 data sheet (PDF)UNO‑FOAM® | QD3000 — Insulation + cover board
Up to 4,800 linear feet of a 1-inch bead per 22 L disposable canister — at 12 inches on center that covers up to 4,800 square feet, or 48 roofing squares, depending on application.
1 square = 100 sq ft.
Each bonded layer is calculated at the published coverage.
Estimate
- Total bonded area
- —
- 22 L canisters
- —
- Published coverage used
- 48 squares per canister
Planning estimate only. This calculator does not determine wind-uplift approval or roof-system design.
One 22 L UNO‑FOAM® canister lays up to 4,800 linear feet of a 1-inch bead. At 12 inches on center that bead covers up to 4,800 square feet — 48 roofing squares — depending on application. The estimate assumes no waste allowance and no change of bead spacing. It is a planning figure, not a system approval or a guaranteed purchase quantity.
*Dependent on temperature and humidity. Coverage varies by application. See current TDS and SDS.
UNO‑FOAM® | QD3000 data sheet (PDF)UNO‑GRIP™ | QD2040 — TPO + EPDM membranes
Up to 10 squares (1,000 sq ft) of bonded area from a 22 L disposable canister.
1 square = 100 sq ft.
Estimate
- Bonded area
- —
- 22 L disposable canisters
- —
- Published coverage used
- 10 squares per canister
Planning estimate only. This calculator does not determine wind-uplift approval or roof-system design.
UNO‑GRIP™ coverage is bonded area. Enter the area you are bonding. Source: QDEK Catalog ECR26-003, page 3. Coverage still varies by application.
The estimate carries no waste allowance and assumes one bonded layer at the published coverage.
*Dependent on temperature and humidity. Coverage varies by application. See current TDS and SDS.
UNO‑GRIP™ | QD2040 data sheet (PDF)Want to see the numbers on your own roof?
Your regional QDEK rep can discuss demo or training options for your crew.